MaxStream 9XTend-PKG-E Manual descarregar pdf (Página 57)

9XTend‐PKG‐E™EthernetRFModem–ProductManualv2.x4x[2007.01.04]

©2007MaxStream,Inc.,Confidential&Proprietary‐AllRightsReserved 57

Limited Modular Approval

Power output is conducted at the antenna terminal and can be adjusted from 1 mill-watt to 1 Watt

at the OEM level. This is an RF modem approved for Limited Modular use operating as a mobile

transmitting device with respect to section 2.1091 and is limited to OEM installation for Mobile and

Fixed applications only. During final installation, end-users are prohibited from access to any pro-

gramming parameters. Professional installation adjustment is required for setting module power

and antenna gain to meet EIRP compliance for high gain antenna(s).

Final antenna installation and operating configurations of this transmitter including antenna gain

and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee

(MaxStream) must coordinate with OEM integrators to ensure the end-users and installers of prod-

ucts operating with the modem are provided with operating instructions to satisfy RF exposure

requirements.

The FCC grant is valid only when the device is sold to OEM integrators. Integrators are instructed

to ensure the end-user has no manual instructions to remove, adjust or install the device.

FCC-approved Antennas

WARNING: This device has been tested with Reverse Polarity SMA connectors with the

antennas listed in the tables of this section. When integrated into OEM products, fixed

antennas require installation preventing end-users from replacing them with non-

approved antennas. Antennas not listed in the tables must be tested to comply with FCC

Section 15.203 (unique antenna connectors) and Section 15.247 (emissions).

Fixed Base Station and Mobile Applications

MaxStream RF Modems are pre-FCC approved for use in fixed base station and mobile applica-

tions. When the antenna is mounted at least 20cm (8") from nearby persons, the application is

considered a mobile application.

Portable Applications and SAR Testing

When the antenna is mounted closer than 20cm to nearby persons, then the application is consid-

ered "portable" and requires an additional test be performed on the final product. This test is

called Specific Absorption Rate (SAR) testing and measures the emissions from the modem and

how they affect the person.

RF Exposure

This statement must be included as a CAUTION statement in OEM product manuals.

WARNING: This equipment is approved only for mobile and base station transmitting

devices. Antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 30 cm from all persons and must not be co-located or operating in

conjunction with any other antenna or transmitter.

NOTE: The separation distance indicated in the above is 30 cm, but any distance greater than or

equal to 23 cm can be used (per MPE evaluation).

1 2 ... 52 53 54 55 56 57 58 59 60 61 62

Comentários a estes Manuais

Sem comentários

Perle systems PERLE P850 Manuale Utente (102 pagine)

Marchio: Perle-systems | Categoria: Hardware | Dimensione: 0.97 MB |

Indice

Perle P850

Contents

1 - INSTALLATION

Identify the Connectors

Connect to the Console

Make the LAN Connections

Power Up the Router

Mandatory Configuration

(Universal WAN only)

Setting the T1/E1Parameters

Identify the Status LEDs

Installation

HOW TO CONFIGURE THEM

Conventions

7 Frame Relay enable

7 Link Speed

7 Auto-Learning

7 LMI Type

7 IP Address

7 PPP Encapsulation

7 Frame Relay disable

7 Local IP Address

Should You Bridge or Route?

WAN connection

7 Default Gateway

7 Edit Static Route

Define an IP Subnet Mask

7 IPX Frame Types

Numbered Links

Unnumbered Links

Configure Dynamic Host

Configuration Protocol

7 DNS Set-Up

Configure Network Address

Translation (NAT)

7 Translation type

Configure PPP Security

7 Security Database Entry

Configure Firewall

7 Firewall Table Entry

ÄConfiguration

ÄIP Routing Set-up

ÄGateway

ÄPPPoE remote site alias

QOS - Priority Queuing

Location: Main

3 - INTRODUCTION TO FILTERING

Pattern Filtering

Popular Filters

Banyan

IP Router

NetBIOS over TCP

Other interesting TCP Ports

APPENDIX A

MENU TREES

Menu Tree

APPENDIX B

OCTET LOCATIONS ON

ETHERNET FRAMES

Netware Frame

ETHERNET Type Codes

TCP/IP Frame

Novell Netware Frame

APPENDIX C

SERVICING INFORMATION

Servicing Information

P850 CSU-DSU or T1/E1

Sanity Timer

Force ZMODEM Software Load

To Clear a “Lost” Password

WAN Interface Connection

T1/E1 Module:

UNIVERSAL WAN Module:

V.35 Link Pinouts

RS232C / V.24 Link Pinouts

RS530 / RS422 Link Pinouts

V.11 / X.21 Link Pinouts

V.11 / X.21 DB25 to DB15

Connector Cable

DB25 MALE

APPENDIX D

SOFTWARE UPGRADES

Più prodotti e manuali per Hardware Perle Systems

Modelli	Tipo di Documento
IOLINK-520	Manuale Utente Perle Systems IOLINK-520 User Manual, 110 pagine
Speed LE 1P	Manuale Utente Perle Systems Speed LE 1P User Manual, 61 pagine
S-110P	Manuale Utente Perle Systems S-110P User Manual, 23 pagine
NOVACOM Wireless Modem GNS-30CR	Manuale Utente Perle Systems NOVACOM Wireless Modem GNS-30CR User Manual, 19 pagine
IOLAN SDS	Manuale Utente Perle Systems IOLAN SDS User Manual, 162 pagine
P840	Manuale Utente Perle Systems P840 User Manual, 58 pagine

MaxStream 9XTend-PKG-E Manual Página 57

Comentários a estes Manuais

Perle Systems PERLE P850 manuali

Perle systems PERLE P850 Manuale Utente (102 pagine)

Indice

Più prodotti e manuali per Hardware Perle Systems

MaxStream 9XTend-PKG-E Manual Página 57

Comentários a estes Manuais

Manuais e produtos relacionados com Redes MaxStream 9XTend-PKG-E

Perle Systems PERLE P850 manuali

Perle systems PERLE P850 Manuale Utente (102 pagine)

Indice

Più prodotti e manuali per Hardware Perle Systems